Jiangsu Juncheng Vehicle Industry, a factory in Baoying, China, is stamping brand-new steel bodies for the Toyota AE86 and Datsun 240Z from about $9,500, Motor1 said on November 17. A new 1967 Ford Mustang shell costs about $16,000. Motor1's story draws on a Hagerty video posted May 23, in which host Larry Chen toured the plant, about three hours north of Shanghai by train. "I know I say this a lot, but this place most definitely blew me away," Chen said, according to Hagerty. Hagerty's Larry Webster wrote on June 12 that the video had passed 3.8 million views in two weeks.
The work starts with two original cars, Motor1 said. One is taken apart and 3D-scanned, and the other is kept to check new panels against factory dimensions. The AE86 and 240Z each need more than 300 stamping dies. Hagerty said the complex dies are CNC-cut from HT300, a high-strength cast iron, then polished by hand. Workers load the presses and weld the panels together by hand, and every part is coated and primed, Motor1 said.
The shells are steel, the same thickness as the originals, Motor1 said. None of the coverage cites an independent test. "Of course, I can't speak to the quality of the chassis," Webster wrote, adding that there's online chatter about poor panel fit on early Juncheng Bronco bodies. A Bronco built on a Juncheng body still sold for $400,000 at Barrett-Jackson, Webster said. The AE86 that Chen watched go together was only the factory's fourth, Hagerty said.
Juncheng also makes bodies and panels for the Land Cruiser FJ40 and Land Rover Defender. A 964-generation Porsche 911 and a Mercedes-Benz 300 SL Gullwing are expected at about $18,000 each, Motor1 said. Buyers can order single panels instead of a whole body.
The company's website lists a left-hand-drive 240Z body in primer with no posted price, and its AE86 page tells buyers to contact the company. Total cost depends a lot on shipping, Webster wrote, and Chen put it under $20,000. Jalopnik put complete bodies at about $20,000 plus shipping and said tariffs could complicate things.

Juncheng showed body shells at the SEMA Show in Las Vegas from November 3 to 6. Its website says the president and CEO of Nissan North America stopped at the booth and posed beside a coupe shell. The post doesn't say what was discussed.
Juncheng doesn't install VIN plates or badges, Motor1 said. The company calls the shells replacement parts for restoring cars more than 25 years old, so a buyer can't register one as a new car. Moving a VIN from a donor car onto a new shell sits in a legal gray area, Motor1 said. None of the reports say Toyota, Nissan, Ford, or Porsche licensed the shells, and none includes a comment from them. Jalopnik noted that some automakers have taken legal action against unauthorized replicas in the past.
Licensed shells do exist. In 2011, Ford approved a new Dynacorn body for 1965 and 1966 Mustang convertibles as a Ford-licensed restoration part, Old Cars Weekly said. In England, British Motor Heritage builds MGB, MG Midget, and classic Mini shells with original press tools and assembly jigs, and holds licenses to use the MG, Mini, and Triumph trademarks, its website says. Jalopnik put its MGB shell at $20,800.
For looks, a fresh shell means factory body lines without decades of rust repair. Hagerty singled out the "crisp details" on Juncheng's 240Z quarter panels. It also gives restomod builders a body to put modern parts under without cutting up a surviving original. Webster called the shells cheap copies of the real thing, but sided with the idea that they could help more people afford their dream cars. Range Rover's boss has even called Chinese lookalikes of its current SUVs a compliment.
New shell or rusty original? Tell us which one you'd build on WhipJury.
Sources:
The November 17 report, the $9,500, $16,000, and $18,000 prices, the scanning process, 300-plus dies, hand welding, coating, steel thickness, single panels, missing VINs and badges, the 25-year argument, and the VIN gray area: Motor1
The May 23 video, Chen's tour, the train distance, HT300 dies, the fourth AE86, and the 240Z quarter panels: Hagerty
The view count, Chen's quote, the quality caveat, Bronco fit chatter, the $400,000 Barrett-Jackson sale, the under-$20,000 total, and Webster's view: Hagerty, Never Stop Driving #188
The $20,000 complete-body price, tariffs, past legal action, and the MGB shell price: Jalopnik
Juncheng's lineup and AE86 contact page: Juncheng classic car page. The 240Z body listing: Juncheng 240Z listing. The SEMA Show booth: Juncheng SEMA post
The Ford-licensed Dynacorn Mustang body: Old Cars Weekly
British Motor Heritage tooling, shells, and trademark licenses: British Motor Heritage
Photos: Toyota Sprinter Trueno AE86 by Tokumeigakarinoaoshima, released under CC0 1.0; Ford Mustang shell by dave_7, licensed under CC BY-SA 2.0
Frequently Asked Questions

Cam Walsh has been obsessing over cars since before he could drive one. Based out of Atlanta, Cam covers automotive design, car culture, and the eternal debate over which whips actually look the part.
